Thanks!
If you’re interested in photography, building your own camera is extremely rewarding, and I can’t recommend it strongly enough. Hit me up if you need any guidance!
Thanks!
If you’re interested in photography, building your own camera is extremely rewarding, and I can’t recommend it strongly enough. Hit me up if you need any guidance!
Thanks!
Cabbage covered a bunch of the process below. In this case, I had a neutral grey background and laid on my back, sticking my hands into the view of the camera. And while watching the scan progress on a screen I moved my hands around until I got this.
It’s a fairly cumbersome process, as each scan takes a couple of minutes and any unintended motion gets captured as well. Out of the 40 or so attempts, this one is the cleanest, both with regards to unintended motion, and with the pose coming out the way I wanted it to.
I’m not with that company anymore, but given the right audience, ‘that time the server room blew up’ is a big hit.
It could have gone way worse. A stressful lesson and a good story is best case scenario outcome when stuff hits the fan.
Years ago I worked for a large-ish post production company. They had recently moved into a swanky new location and everything there was tailored to spec, including the server room. In norwegian we sometimes call a server room a ‘machine room’, this is relevant.
As a part of the server room spec, a dry fire suppression system was among the requirements.
The summer of the incident was particularly hot, and we experienced some trouble with our cooling, so a cooling technician was called to have a look. While he was working on the unit inside the server room, he made a mistake that caused all the cooling gas to dump into the room, triggering the fire extinguishers.
A dry fire system works by releasing an inert gas into a space to displace any oxygen, effectively choking any fire. I imagine this is usually done by some solenoids opening some canisters of gas and the room quickly, but gradually becomes oxygen free. Luckily, my boss at the time was present and he quickly got both himself and the tech to safety.
All good right? No. The contractor who constructed the new location had ordered and installed a system meant for maritime machine rooms, not the computer ‘machine room’ we had. In an environment filled with fuel and grease, you optimize towards filling the room with an inert gas as quickly as possible, and it turns out they use explosives to complete the task. In this room there were three canisters in the ceiling with fire shooting out of them, burning pellets to generate the inert gas. The gas and smoke from the canisters combined with the leaked cooling gas, and started condensing.
Into hydrochloric acid.
While all this was going on, all of the servers and workstations were happily humming along, sucking the now extremely corrosive atmosphere into themselves, making sure that every nook and cranny inside and outside got covered in a thin greasy film of acid.
The aftermath: Mine and two colleagues’s summer break was cut short, as we were called in to do damage control. Ripping out and wiping hard drives clean was what we did all summer. With external help we managed to recover all of the data. One feature film was delayed a few weeks. The insurance payout actually made the company a bit ahead financially. As far as I know there’s still burn marks in the floor of the server room, from when flames shot out of the fire extinguishers. Everyone involved now knows what a proper dry fire suppression system for a server room looks like.
The kicker is, the cooling was messed up because a fabric awning on the building had fallen down and was covering the air intake. If anyone had thought to check the roof this whole thing would have been avoided, and that server room would probably still have bombs attached to its ceiling.
Good ifra, unfortunately my engineering skills stop at desk-sized
Hah! Thanks, I’ll let you know! Maybe I can set up some guerilla style exhibition in a nearby alley 😂
Thanks! I appreciate the feedback. I don’t crop shots done with this camera, I want to preserve the organic borders and learn to live with what is captured without messing too much with it.
However, I halfway agree with your observation, on a small screen this really could do with a tighter framing, or maybe bringing the model closer to the camera. But in a larger print (this is one of two shots Ive printed in 80x80 cm), the airy composition works really well.
I refuse to ignore you!
Slightly toast towing slices of whole grain bread in a buttered pan, between them, you put butter fried chanterelle mushrooms, sprinkle with a pinch of salt and freshly ground black pepper to taste. Bonus points if you found the the chanterelles yourself.
As for busy road at night, I’m afraid that with this way of doing scanning photography it would be quite uninteresting. The motion is way too quick, and cars would render as with either weird vertical lines or very small diagonal squiggles, depending on which direction you scan.
I suggest looking up some talks by the Italian photographer Adam Magyar, he’s done some great talks on transchronologal (?) photography, and is a great artist himself.
I love the small insights into signal theory/processing generated by this image, this is really cool stuff! Thank you for chiming in.
Of course there’s some ancient broadcast standard at the bottom of 44.1khz, thanks for the clarification! (I work in film/TV and still struggle with explaining explaining ‘illegal’ values to some clients on certain deliverables)
Or a wheatfield, definetly not water though…
I haven’t really considered that, I’m assuming the (in this case) vertical sampling is ‘global’, as in the values at each sensor site is locked at the same time and then read out from the serial bus.
If there was a delay, stuff like fluorescent lighting would read as a moire pattern, but I’ve only ever encountered streaking/linear distortion in those circumstances.
I think the ‘griddyness’ or general sense of direction in the water is purely a function of how water moves and not a result of readout delay.
I’d love to be proven wrong, though, so if I can do some experiment to determine either way, I’m all ears.
Thanks! I’d love to hear your thoughts if you feel like sharing.
Agreed, it’s usually not that spiky
Thanks! Your nitpicking is most welcome.
Thanks, I agree, it’s one of my favorite shots from this camera.
That’s pretty clever. You’re walking in the footsteps of the Dutch masters, using projection in this way. I really like the drawings, and congratulations on finding more uses for your device!
When rolling shutter is the main event, better make it look good, right?
I have a series of shots with the fabric, it’s the centerpiece of all of them, in that case it helps a lot!
Since I built the camera, I’ve been looking for ways to use its artifacts and idiosyncrasies to make pictures no one has ever seen, the temporal skew that it allows is super interesting to me.
As far as I understand, BankID actually abstracts away those numbers. FB have to use an API, and more or less receive a true or false on their query.
They recently opened up for using BankID to prove your age at bars and such, and I think they only get to know if person is old enough or not. Not even a number, just old enough.