I’ve never done any sort of home networking or self-hosting of any kind but thanks to Jellyfin and Mastodon I’ve become interested in the idea. As I understand it, physical servers (“bare metal” correct?) are PCs intended for data storing and hosting services instead of being used as a daily driver like my desktop. From my (admittedly) limited research, dedicated servers are a bit expensive. However, it seems that you can convert an old PC and even laptop into a server (examples here and here). But should I use that or are there dedicated servers at “affordable” price points. Since is this is first experience with self-hosting, which would be a better route to take?
My home server is made of literal garbage.
You don’t need more than an old desktop with a low powered i3/i5 and a free drive bays to build your first NAS. Just install TrueNAS and get going.
Yeah, any relatively modern used PC will be more than enough
There are advantages to getting server-grade hardware. It’s designed to run 24/7, often supports more hard drives, ram sticks, processors, etc, and often is designed to make it very quick to replace things when they break.
You can find used servers on sites like EBay for reasonable prices. They typically come from businesses selling their old hardware after an upgrade.
However, for simple home use cases, an old regular desktop PC will be just fine. Run it until it breaks!
LabGopher extracts information from active eBay listings to help you easily find the right hardware for your needs.
I use my former PC as the home server. It is probably 10+ years old, has no M2 slot or something, but an SSD for the OS. More than big and fast enough for all my needs: File service (Samba), Web service (apache2), Wiki service (mediawiki), Database (MySQL), Calendar service (Radicale), Project service (Subversion), and probably some others I forgot. All of it running on Ubuntu Server, aministrated by WebMin.
The only investment I did when I turned this into a server was that I put 2x8TB in it as a RAID for bulk storage - I dump the family PCs backups on that machine, too.
My home media server is an old nuc mini pc i5 16Gb RAM with attached usb storage running on a Linux distro, runs Jellyfin and a few other applications for the household.
In short yes, an old pc will work fine.
These also have the advantage of being nice and quiet, which if you are going to have it in your house rather than a hot garage or whatever can be nice.
I bought a NAS, later realised that it supported Plex and Jellyfin but it was often too slow to do the transcoding. I still use it for storage but there were no real upgrade options. It was cheaper to get an old NUC, rather than replace the NAS with a high spec one to be able to run Jellyfin properly.I’m doing a very similar thing with an old Dell thin client. I did inherit a large server from a company that was upgrading, but I’ve been thinking about downsizing a lot lately so now I use a few small computers on a 10 inch rack.
the best server is one that you already have
Do it. Jump in. Just start with whatever you can assemble.
It’s a great way to keep your room warm.Certainly could, depends what exactly you want to run and the specs of the machine of course. Something to keep in mind though is if its very old it may cost more in electricity than a fairly cheap new machine. But really it depends on your use case.
A lot of self hosted things have fairly low requirements but not all of them.
Servers are just computers, you build what you are going to use it for. You can use a cheap N100 mini pc to host jellyfin as the important part there is the video encoder/decoder to transcode video. Though it can only do 2 streams at 4k with tone mapping. So it might not be good enough if you have more than 2 people using it or are running more stuff on it.
I installed a Linux server on an old laptop, then installed Jellyfin. It’s like a Walmart special from 8 years ago, so no graphics card outside of the integrated graphics. Doesn’t matter. I disabled sleep, and power saving settings on the Wi-Fi. I had a USB external 1tb drive hooked to it. The laptop doesn’t even have support for a 5ghz wifi connection. No issues at all. I can run 2 movies at 1080p in different rooms off the external USB drive without issue. Just go for it. I installed RustDesk on it so wherever I am I can remote to it, turn on the VPN and kick off a torrent for whatever movie someone mentioned while at work or what not. Then when I get home it’s there.
Absolutely yes. It’s better to use an old PC for a home server, because upgrades are cheaper, parts are easier to find, troubleshooting is generally easier, they’re usually more energy efficient than an older dedicated server, and you’re saving an old pc from becoming e-waste.
That being said, what you want to run on it determines how old/cheap of a PC could work for you.
Jellyfin works best when you can do hardware encoding, and these days that means throwing an ARC A310 in there and calling it a day. If you have a new enough processor, you don’t even need the graphics card.
Mastodon is pretty disk heavy, but if you’ve got a nice hard disk to put the Minio server on and an SSD for the db, you’re golden. That’s how I run https://port87.social/. It’s running on an old 6th gen Intel i7. The PC I built in 2015 (with a few upgrades).
CPU intensive servers like Minecraft are where you start to run into problems with older hardware. If it’s just you on there, a 10 year old CPU is fine, but if you’ve got a few friends, the server may start to struggle to keep up. I had to move my server off that same system I talked about above, because Minecraft was pegging the CPU a lot. But a 5 year old CPU would be fine for that. (Assuming that the 10 year old and 5 year old CPUs were both top tier CPUs when they were new. Like i7, i9, Ryzen 7, Ryzen 9. A five year old i3 would still struggle.)
Basically unless you’re trying to run AI models on it, cheap hardware is fantastic for personal servers.
CPU intensive servers like Minecraft are where you start to run into problems with older hardware. If it’s just you on there, a 10 year old CPU is fine, but if you’ve got a few friends, the server may start to struggle to keep up.
Not sure how recently you ran this, or what all your were running, but in the past couple of years Paper has hit some pretty major milestones in unlocking threaded processing. Barring some sort of spammy 0-tick redstone nonsense or over the top plugins, I’d wager a Raspberry Pi 4 could handle up to about 5 or 6 friends without seeing any TPS dips. Its really remarkable how far they’ve pushed performance recently.
That’s really cool! I just run the vanilla server, but maybe I should check out Paper. Can it import worlds from vanilla?
Yes, it absolutely can, it’s super easy! Just swap your Minecraft .jar with Paper and it’ll do the rest. It’s a tiny bit harder to go back, but only marginally.
Out of the box, aside from huge performance benefits, Paper is virtually indistinguishable from vanilla, but it also opens the door to a whole world of easy-to-use server-side plugins.
Edit: (you should still make a backup before swapping, just in case)
That’s awesome! Yeah, I’ll definitely check it out. Thank you!
Wondering if you have and insight on power usage with the a310 in the system while idling. I built a sub 25w server and don’t want to mess that up.
Sorry, but I don’t know. I use an A380 in my system. I got it before the A310 was available.
How does the a380 impact your power consumption? If you have ever measured it.
My server pc is just my old computer parts. Ryzen 3 2200G with with 6Gb of RAM. It gets the job done!
There’s no right way, really. You can turn almost anything into a server.
If you have old hardware laying around I suggest you start with that. When you’re comfortable with setting everything up and using it on your day to day, then it’s time to invest into hardware.
My server is an HP Small Form Factor Corei5 32GB RAM that I bought on a second hand shop. The thing I paid attention the most was the i5’s gen, as some older ones don’t include h265 transcoding acceleration, or sometimes h264. This is rather important for Jellyfin. ANything else, just go with it and try!
You definitely want an 8th gen (Intel) or better to have Jellyfin Quick Sync support. It’s what I have (i5-8400T) and it offer a fairly decent AVC (h264) and HEVC (h265) transcoding for my usage. However, for futur proofing consider an 11th gen for the AV1 support.
Yes, you can easily do it.
You want to look at 2 things: 1. Noise 2. Ratio of performance / power usage.
- Noise
When your PC runs 24/7 then it might be annoying to hear it’s noise sometimes. Real server cases are usually even much louder than former PC’s because they are built for super strong air flow inside.
Think carefully what you need. In my situation it is just one light wooden door away from my bed, so I wanted it impossible to hear. I optimized it so, and it ended up being so quiet that I cannot hear any fans, but I hear the clicking of the harddisks all the time. Well, I got used to that, mostly. For my next home server I want to build my own case that absolutely blocks this noise.
- Ratio of performance / power usage
People are frequently asking what if I turn this old Pentium etc. into a server?
Well, these old CPU’s have very low performance compared to new ones, but it might just be sufficient. But then you recognize that the old veterans burn 100 Watts for the same performance where a modern (low performance) CPU burns only 5 Watts, and now it will do that 24/7. Think about your yearly costs. Many times it turns out that buying a new one saves your money very easily.
