• Mikina@programming.dev
    link
    fedilink
    arrow-up
    31
    ·
    3 months ago

    This is the first time I’m hearing about Framework. Is it worth it? I’m looking for a new laptop anyway

    • Dave@lemmy.nz
      link
      fedilink
      arrow-up
      60
      ·
      edit-2
      3 months ago

      I guess it depends what you value. I have a Framework 13, first generation. I run Linux on it and really enjoyed putting it together myself (I ordered the DIY option).

      I absolutely love their ports. You swap in the ports you want. I normally run a USB C on either side (so I can charge from either side) plus a USB A on each side (the Framework 13 has two slots each side, I think the 16 might have 3 each side?). But I also have HDMI, Display Port, and micro SD in case I need them. I can hot swap them in.

      Their guides are awesome. I broke a screen and was able to order another and replace it myself following their guide. When the time comes (probably in the next year or so) I’m planning on upgrading. A bit like a desktop, since it’s been a few years it means replacing the motherboard (what they call the mainboard) and RAM since technology moves on. I"m pretty sure like all laptops the CPU is fixed to the mainboard, but you can upgrade RAM or storage without replacing the whole guts (assuming same slot type). In fact you can buy without some pieces and reuse stuff you have or buy from elsewhere to save some money.

      When I eventually do it I’m planning on strapping the old mainboard to the back of my TV as a HTPC (replacing the old dying laptop currently there).

      There are plenty of downsides. No touchscreen. I wish the screen was a little brighter, it’s not bad but could be better (might be better with later models?). I replaced the hinges with their more resistant ones but the screen still moves if I carry it around with the screen open (not sure if it’s still an issue on newer models).

      I really value the idea of repairability and upgradeability. When I was younger you could swap a bigger harddrive or RAM into a laptop if you had a screwdriver (and sometimes even without), and repairing other parts was also possible. These days you’re more likely to find the whole thing glued together. Framework lets you do your own repairs, and has guides to walk you through every step.

      There are probably more downsides, but I do love it and would buy another in a heartbeat. But if there are special things you need then carefully check. For example last I checked they did not have a full size SD card reader module available (though of course you can use a regular external one if you really need to).

      • subtext@lemmy.world
        link
        fedilink
        arrow-up
        20
        ·
        3 months ago

        The biggest one that I’m glad to never have to worry about:

        User replaceable battery

        You can even put a bigger battery in down the line if you wish. No planned obsolescence.

        • cor315@lemmy.world
          link
          fedilink
          arrow-up
          5
          ·
          3 months ago

          I mean, all the dell business laptops I’ve purchased have a replaceable battery. You just have to unscrew the bottom panel to do it. But no, they don’t have a swappable battery.

          • Dave@lemmy.nz
            link
            fedilink
            arrow-up
            4
            ·
            3 months ago

            My experience with laptops in recent years is that having a replaceable battery is the exception.

        • Dave@lemmy.nz
          link
          fedilink
          arrow-up
          2
          ·
          3 months ago

          Yes! I don’t really rely on the battery that much but it’s nice to know I could buy a bigger one in the future.

          Worth pointing out it’s not swappable, and many people have found the battery life a little lacking.

      • itsmect@monero.town
        link
        fedilink
        arrow-up
        3
        ·
        3 months ago

        The SD expansion card is “comming soon” according to their store page, and they showed prototypes that looked close to production on their youtube channel. My best guess is release in Q4

        • Dave@lemmy.nz
          link
          fedilink
          arrow-up
          2
          ·
          3 months ago

          Yeah their youtube has a video talking about their struggles with getting a commonly available full size SD card reader to fit into one of their expansion cards. I have an external reader I inherited from somewhere so I’m not too worried.

    • Contramuffin@lemmy.world
      link
      fedilink
      arrow-up
      31
      ·
      3 months ago

      Best laptop I’ve had so far, but they’re quite expensive for their performance tier. The expectation is that you’d never replace it, so theoretically the cost pays itself off over time, but that would assume that you are able and willing to do that sort of long term maintenance.

      Basically, I would only recommend it if you were a tinkerer.

      • Piranha Phish@lemmy.world
        link
        fedilink
        arrow-up
        11
        ·
        3 months ago

        I disagree on the comment about cost disparity. Spec’d equivalently, even the Framework 16 (without GPU) is no more expensive than the smaller ThinkPad X1 Carbon. The more comparative Framework 13 even less so.

        The modular ports (and GPU on the 16) are a nice bonus, but I agree that the largest attraction is for the tinkerer.

        I think the fact that it is easily upgradable makes it a clear winner on the merits alone.

        • ByteOnBikes@slrpnk.net
          link
          fedilink
          arrow-up
          3
          ·
          edit-2
          3 months ago

          I did a price comparison three years ago when I was exploring laptops and the price for a Framework was really high. Like it was “cheaper to buy a used laptop every three years for a decade before I break even on a Framework” high.

          I’m not knocking it at all and I think it’s a great idea. It just the cost is so high, and they don’t have the means to produce where the price is at a consumer level.

      • itsmect@monero.town
        link
        fedilink
        arrow-up
        3
        ·
        3 months ago

        Agreed. If you buy the minimum spec bare bones version and get RAM and NVME from a third party, the price is somewhat comparative to other MRSPs. If you go for a higher spec or compare to sales prices instead of MSRP you pay up to 50% premium according to my research.

        If you however factor in downtime of a broken and non-repairable device, plus the time spend on setting up a replacement, the framework can easily compete if your setup is complex.

    • bobs_monkey@lemm.ee
      link
      fedilink
      arrow-up
      27
      arrow-down
      1
      ·
      3 months ago

      If you’ve got the cash to spare, they just about kick the shit out of absolutely everything on the market, and are consumer repairable to boot.

    • egonallanon@lemm.ee
      link
      fedilink
      arrow-up
      12
      ·
      3 months ago

      I like mine a lot but as the other commenter alluded too they’re pretty pricey but for the 13inch one I think it’s the best laptop on the market at that size at the moment.

    • breakingcups@lemmy.world
      link
      fedilink
      arrow-up
      7
      ·
      3 months ago

      I love it, it’s amazing.

      I do have the first generation which has a battery drain issue, which has since been fixed.

      I always use my hardware for a looong time, but I look forward to only having to replace the main mobo and not the screen or keyboard when I do need an upgrade.

    • SkaveRat@discuss.tchncs.de
      link
      fedilink
      arrow-up
      2
      ·
      3 months ago

      if you’re willing to pay a bit extra for futureproofing your setup, then absolutely.

      I own two (work and personal) 13" framework, and they are great little machines.

      Some people don’t like the size (or the 3:2 ratio screen), but I think it’s perfect