This is what I use and it’s quite impressive.
https://community.home-assistant.io/t/simple-scheduler-addon/174326
I’ve had it for a few years and it never has failed to run on time every time. Can automate more than lights with it and it’s really just a point/click set and forget type of thing.
My setup for my lights. :)
If your router supports Freshtomato firmware, it also has adguard you can enable too.
Like others have said Arch is not as intimidating as it would appear to be. Over the last couple of years, they improved IHMO the most difficult process for the average user of installing Arch. You now just run archinstall Then follow the system prompts. It’s constantly being improved. If you do go with Arch, aside from using Pacman to install apps, you can use “Yay” or “Paru” or others which pull from the vast AUR repository.
I used Arch for a few years and recently moved over to Aurora Linux (Immutable KDE distro adapted from Fedora’s CoreOS and uBlueOS which is an offshoot of CoreOS) Specifically, I use the Developer experience of Aurora which gives you a VSCode type of editor as well as Podman desktop included as well as other items. It’s meant for those who wish to develop and not have to worry about keeping the system up to date. It runs updates in the background and rebooting your system will run the updates.
The reason I left Arch was simple, I used to like to live on the edge of software as well, until it took one too many hastily released updates which borked my Arch system. My home PC has morphed from being my dedicated computer to my wife’s and my computer which is fine, but I’d like to keep it available for her avoiding the need to do a repair because an update broke it.
Keep an eye out for the KDE Linux OS which they have in development and not yet for use, but is earmarked for being the official immutable OS for KDE which will receive their bleeding edge updates. https://linuxiac.com/kde-announced-its-kde-linux-distro/ https://community.kde.org/KDE_Linux
I plan on migrating to that once it’s finished. :) I’ve become a fan of immutable OS’s because they allow you to roll back if something should go wrong. Which it rarely does :)
I know about that function. It’s mostly just about if there were any other options. I mean, I can find a folder icon pack probably, but that would make the ones I wanted customized but and also not match. For example, if I did a green folder and it was not flat like the Breeze ones are then it would look out of place until I replaced everyone with the one from the pack.
This is anecdotal, only to say that the Linksys WRT-54G IMHO is/was a beast in the SOHO world. Back in 2013, I worked for the county replacing older equipment and it was time to upgrade the router in the fairgrounds lobby at the start of summer. Up we went to the rafters where it was and it was quite dusty in there, tons of pigeon feathers and miserably hot in the attic as most are. We pulled the router from service and replaced it with the new one already configured. The wrt54G was COVERED in dust, Pigeon droppings and feathers stuck to it. It ran forever that way I suspect. From what I was told, is was installed about 7 or 8 years prior, maybe longer.
To this day, I think Linksys must have partnered with Nokia’s wizards for how sturdy that router was/is. You can still find them in our second hand stores and most people push DD-WRT on them. But since they are 10/100, they’re not as popular anymore.
You could always use ntfy.sh if you are wanting to keep it light weight, I know there seems to be a heavy following and happy community with it. I personally use Gotify which has been nice and easy to use and just works for my needs. :) I looked at the shoutrrr repo and it seems to be either abandoned or just no longer updating maybe because their is no need to in the Dev’s eyes. They also develop Watchtower which hasn’t been touched in about 2 years ago. I have never had any issues with Watchtower so I think it may not need much maintenance. I do see though that they are working on a new project: https://github.com/containrrr/shepherd but it’s also a bit stale.
To make it seamless so you can still Thunderbird, someone made a Docker image of it here: https://hub.docker.com/r/kebles/wanderbird But, you can probably find a newer release somewhere newer than 4 yrs old like this one. :) The point is, if you are wanting to keep it in the Thunderbird umbrella, then it’s most likely been Dockerized.
I’ve Tried Cypht recently, but if you are using Gmail, it has a conflict there so it won’t work out of the box without some extra work I think.
I can see them doing that, I use a DNS ad-block (Adguardhome) with plenty of filters and last night, I spotted that they were able to inject two ads (standard one to the right of the channels and one at the bottom below the menu for the new Minecraft movie when they changed my background. So, they are finding ways around this stuff. I simply disabled the Sponsored themes. We are on the fence about replacing the TV later this year but not 100% sure just yet. It’s been quite buggy randomly rebooting when switching sources and other things.
Not related to the server, but I was very happily surprised with the latest Roku Jellyfin channel. A complete refresh of everything and it’s great to see it.
Thanks for sharing this! I used it today to resize my Very large phone selfie I had to do for a profile image update at work and it did very nicely! Much faster for me to do that then load it in Gimp and scale it down since I was running late for work. : )
Hmmm… Interesting! I didn’t realize there was a fork, but then again, this is one of those tools I’ve had running for several months close to a year or so and never thought about it. The original dev, Corentin, has been working on many more new projects: https://bsky.app/profile/corentin.tech .
I have several services. Home Assistant is not one as it’s still a WIP for the person who’s developing a solution. It works, but I’m sort of holding off until I can test it more with the mobile app.
https://github.com/christiaangoossens/hass-oidc-auth
But, to answer your question: I log into Tailscale with it. I also have it connected to Proxmox and Portainer Additionally, I have it connected to Pomerium so I can log into my FreshTomato Router with a fingerprint :) I also have a self hosted PasteBin connected to it.
I just tested my version of Firefox (Fresh from Play Store) and it worked without issues on my end to login to the server.
The only browser I’m aware of which doesn’t support it is the Duck Duck Go Browser which is a shame. They don’t seem to care about enabling WebAuthn support.
Pocket id is my go to. I used to use Authentik, but it was overkill for us. Pocket ID is pretty simple to use and has a very nice interface to add your users and clients. Uncluttered and straight and to the point. Pocket ID doesn’t use UN/PW Combos. Instead, you use Passkeys as in webAuthn devices to log in, which IMHO is one of the better security paths.
I work from home, however my two systems (home and work) are on the same LAN, they don’t see each other for file sharing. I get paid via direct deposit like everyone else which means my pay stubs are all electronic. I print those out and then use WinSCP to copy those over to my desktop. No other files are ever sent.
At home, depending on the amount of files, I either use SFTP via Filezilla, or if the mood strikes me and for a single file, I will just use SCP if I’m already on the cli which is most of the time it seems anymore doing work on my personal servers. I’ve found that SFTP is faster at transferring than doing a copy/paste to the NFS share to the same drive.
Yes. I have a network server for my printer and works. Also a label printer hooked up via USB. Also USB SSD and other drives. You should not see any problems.
I came from Arch to Fedora as well but using Universal Blue’s images. In my case, Aurora (KDE), and daughter’s Bluefin (Gnome). They update in the background and only install when you reboot. So far, most of the newer software releases such as web browsers or the desktop environment fall within a day or two for being installed which is a nice alternative. The big plus I see on these too is they are immutable so if something installs or breaks, you just boot into the previous version from Grub and go from there.
Additionally, OpenSuse MicroOS has options for whatever environment you are used to such as Gnome or KDE, this is immutable as well. I view all of these as “Set and Forget”.
I have AdguardHome on my RPi4 (4GB) model, and it works perfectly fine. I have also hosted Pi-Hole v.5 and even their recent Pi-Hole v6 they just released on it and have even at times run TechnitiumDNS on it. Not all at once of course, but I wanted to let you know you can host any of these on a RPi without issues.
One think you get with the Pi-hole is you can set up a DNS entry where you could for example, set up “laptop” and any time you want to access it or ping it, anywhere on your network, you can simply just enter in http://laptop/ or ping laptop. With both AdguardHome and Technitium, you need to append the .local or .internal or .home subdomain to make it work. It’s not really an issue for me since I just modify my hosts file on my computer to do the same thing, but is sort of cool when you use a system on the network to just go to http://homepage/ to reach your dashboard like Homarr or Flame on your phone where you can’t adjust the hosts file as easily.
TechnitiumDNS is what you want if you are wanting to dive deep into your world of DNS configurations, from there, I was able to set up a redirect to my PXE boot server so when devices would grab their IP from the DHCP server, if they queried for a boot device, it would tell the device where to boot from. I’m pretty sure you can do that with PiHole, but I may be wrong. Additionally, with TechntiumDNS, I was able to set up an adblock for my IoT’s VLAN network. without the need to add a second one to the network. As far as I can tell, with the other solutions, this is not as easy to do.
If you are wanting to determine which would be easier to run, I would say AdguardHome for the easiest. Next in line is PiHole v6. and lastly TechnitiumDNS if you really want to dive into the complexities. It is a good business class DNS server. The reason I’m on AdGuardHome right now is for as others stated simplicity. TechnitiumDNS is overkill for my home network, PiHole V6 took forever for them to release, but was a major re-write and if you want to set up your DHCP static mapping like I do, they kneecapped the entry a bit. It’s still there, but not as easy to find and more of a thing like (I don’t recall the order it goes on) MAC;IP;HOSTNAME or something like that instead of the easier method of just clicking in a row and entering those data points one per field like AdGuardHome, and TechnitiumDNS do. Pihole V5 included.
My Network pretty much has 3 layers of DNS filtering active, The first layer is on my router which has built in adblock (FreshTomato), then AdGuardHome, and finally, browser level blocking. I don’t get Youtube Ads on my computers, but on the phones and TV I do. In the browser, I use U-Block Origin which is in the cat and mouse game with Youtube ad-blocking.
Are there any plans to make a Flatpak version of this? I’ve moved to an immutable OS and none of the options you have will install. Flatpaks are their preferred method. I know I could self host my own version which may be what I may end up doing anyway, but I’d prefer to have it more local yet another docker container. :)
Edit: I just went with the Appimage which works.